Paul Mueller Careers

Summary

The Welding/Grinding Apprentice position begins as an entry level position and progresses into skilled welding and grinding through multiple trainings and hands-on learning opportunities.  This position will advance as skills are gained and abilities increase through the essential job functions listed below.

Essential Job Functions / Knowledge, Skills, Abilities (Competencies)

Module 1

• Ability to read a tape measure and blue prints.
• Basic knowledge of math principles and computer skills. 

• Responsible for general work procedures in regards to marking and tagging material with proper work order number and heat codes as required.
• Responsible for labeling incoming material with part number and heat code.
• Responsible for operating equipment (i.e. rolls, shears, brakes, forming equipment, sandblast, etc.) that is repetitive in nature, requires minimal or routine set up, or set up is performed by someone else.
• Responsible for operation of overhead cranes and JIB hoists in a safe manner, including selecting appropriate rigging. *Age specific requirement.
• Responsible to build, assemble, test and repair components, subassemblies and assemblies, etc.
• Responsible to cut scrap using equipment such as shears, manual plasma cutters, ironworkers, etc.
• Responsible to perform tack welds and welds in the flat position that meet quality and dimensional standards.
• Responsible to prepare and sandblast material as needed.
• Responsible to performs calibration of vessels.
• Responsible to grind, deburr, bevel and prepare edges or surfaces of material.
• Responsible to quarter heads and shells with assistance.
• Satisfactorily complete Manufacturing 101.
• Satisfactorily complete basic welding and basic grinding.

Module 2

• Basic blueprint reading knowledge.
• Basic mechanical knowledge and ability.
• Basic knowledge of product, mechanics, shop mathematics, shop processes and procedures.
• Basic knowledge of grinding abrasives and material surface finishes.
• Basic knowledge to understand and work from drawings and/or specifications with proficiency.
• Responsible to setup, operate and maintain manual welding, grinding and/or cutting equipment.
• Responsible to recognize, setup and operate hand and power tools common to the industry.
• Responsible to quarter heads and shells independently.
• Responsible to examine work pieces for defects and measure work pieces to ensure conformance to specifications.
• Responsible to monitor welding procedures to avoid warping, shrinking or otherwise distorting weldments.
• Responsible to position and secure work pieces using overhead cranes, hoists, fork lifts, etc. 

*Age specific requirement.

• Responsible to grind to a # 4 finish using procedures typically determined by others.
• Responsible to setup, operate and maintain outer diameter pipe polishing equipment.
• Responsible to setup, operate and maintain flat bar polishing equipment.
• Satisfactorily complete intermediate welding and basic grinding.
• Intermediate knowledge of grinding abrasives and material surface finishes.
• Intermediate knowledge to understand and work from drawings and/or specifications with proficiency.
• Responsible to perform difficult and unusual manual and machine welding operations in all positions on a wide range of metals and alloys, including layout and fit up. 
• Responsible to fuse dissimilar metals, maximize weld strength, avoid distortion and conform with exacting tolerances and specifications. 
• Satisfactorily complete advanced welding and grinding.
• Advanced knowledge of grinding abrasives and material surface finishes.
• Advanced knowledge and understanding of work from drawings and/or specifications with proficiency.
• Ability to grind to a # 7 finish using procedures as determined.
• Responsible to determine welding procedures to avoid warping, shrinking or otherwise distorting weldments.
• Responsible to setup, operate and maintain manual or automatic welding, grinding and/or cutting equipment.
• Responsible to recognize, setup and operate hand and power tools common to the industry.
• Responsible to examine work pieces for defects and measure work pieces to ensure conformance to specifications.
• Responsible to position and secure work pieces using overhead cranes, hoists, fork lifts, etc.

Module 3

• Intermediate blueprint reading knowledge.
• Intermediate mechanical knowledge and ability.
• Intermediate knowledge of product, mechanics, shop mathematics, shop processes and procedures.
• Intermediate knowledge, skills and ability on press brakes, shears, rolls and various forming equipment.       
• Intermediate knowledge in physical properties of metal, effects of heat, allowances for thickness, weld shrinkage and welding techniques.
• Responsible to operate mobile crane equipment with the capacity of less than 20,000 lbs. and directs the rigging and hoisting of equipment. *Age specific requirement.
• Responsible to set up and operate machines to make production parts to standard shop blueprints.
• Responsible to perform welding, grinding and cutting operations.  Care required in blocking, clamping and holding parts to avoid distortion and conform with tolerances and specifications. 
• Responsible for grinding where grade and type of abrasives are determined by others.
• Responsible for quartering heads and shells for fit-up and determine degrees and location of fittings and nozzles.
• Responsible to operate spray foam insulating, painting, and sandblast equipment.
• Responsible to operate machines that require minimal skills and experience, such as presses, shears, saws, rolls, etc.
• Responsible to layout, locate and mark bending lines, construct templates and patterns.

Module 4

• Advanced knowledge in skill, abilities and knowledge in welding, grinding, machine operation, etc.
• Advanced knowledge to read, interpret and work from blueprints, sketches or other specifications.
• Advanced mechanical knowledge and ability.
• Advanced knowledge of product, mechanics, shop mathematics, shop processes and procedures.
• Advanced knowledge and ability to shape, cut or form metal to fabricate complex parts using press brakes, shears, rolls and various forming equipment. 

*Age specific requirement.

• Responsible for proper use of outer diameter pipe polishing and flat bar polishing equipment.

• Responsible to perform difficult and unusual manual and machine welding operations in all positions on a wide range of metals and alloys, including layout and fit up.
• Act as a mentor to newer or less skilled coworkers. 

All modules listed above also must meet the required Essential Job Functions / Knowledge, Skills, Abilities (Competencies)

• Ensure lessons learned are applied to future efforts.
• The ability to work in a constant state of alertness and a safe manner.
• Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position.
• Ability to promote a safe work environment.
• Ability to take initiative and be a self-starter to meet production demands and schedules.
• Ability to work independently and in a team environment.
• Basic mechanical knowledge and ability.
• Make suggestions regarding continuous improvement and execute ways to improve. 
• Maintain a clean, safe work environment.

Education and Experience

• Enrollment in current High school education program.

Base Compensation: Starts at $17 an hour

Work Environment

Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. Machinery with energy sources including electrical, mechanical, hydraulic, pneumatic, chemical, or other energy.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. While performing the duties of this position, the employee is regularly required to walk, stand, use hands and fingers, handle, grasp or feel; reach with hands and arms climb or balance; stoop, kneel, crouch or crawl. 

Additional effort requirements consist of, but are not limited to, lifting, pushing and pulling material, stairs, and ladders. When there is an occasion to move heavy material greater than 50 pounds, the operator will request assistance from another operator, or utilize provided lifting equipment.

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

Travel throughout the United States and Canada while operating newer equipment and enjoy being home most weekends.  The Over the Road Driver position is responsible for the delivery of our stainless steel products directly to our customers.  This position is responsible for safe loading and unloading of the product as well as securing loads for travel.  The Over the Road Driver must comply with all safety and transportation rules and regulations for all of North America and Canada established by the Department of Transportation. 

 Essential Job Functions

• Long distance driving with oversized loads throughout North America and Canada.
• Assist with loading and unloading equipment and product as needed.
• Ensure all loads are secure utilizing chains, straps, tarps, etc.
• Assist with assembling and disassembling trailers as needed.
• Communicate with customer as needed.
• Ensure customer deliveries arrive on time and as expected.
• Communicate with Mueller Transportation operations team as needed. 
• Maintain a detailed log of working hours to ensure compliance with state and federal rules and regulations.
• Comply with the Federal Motor Carrier Safety Administration (FMCSA) rules and regulations.
• Must maintain a valid Class A Commercial Driver’s License.
• The ability to work in a constant state of alertness & safe manner.

 Knowledge, Skills, Abilities (Competencies)

• Motivated to work and deliver product in a timely manner.
• Ability to work independently or collaboratively with a team.
• Ability to problem solve quickly and efficiently. 
• Strong interpersonal skills that allow for effective communication to our customers.

 Education and Experience

2 years of over the road experience within the last 5 years is preferred. 

Drivers with less than 2 years of over the road experience will be considered. 

Base Comp: Based on practical miles                                                        $0.75/mile

Oversize Loads                                                                                             $0.12/mile

Super loads (One-Way Trip):                                                                        $600/day

• Based on State of Missouri super load classification                             
• Hotels paid while under load 
• Return Trip per mileage standard (non-super load)

Stop Pay (per stop after 1^st stop)                                                                   $30.00

Tarp Pay (Unless tarped and un-tarped by others)                                        $50.00/load

Trailer rigging:  Talbert tank trailers                                                              $75.00

Hourly Pay Work                                                                                           $25.00/hr.

• Yard Work
• Stand By/Layover Pay                                                                                                                                      
  • If load/unload is not complete within 2 hours of scheduled arrival time, stand by time begins after 2 hours.
  • Stand By/Layover paid at a maximum of 10 hours.       

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

Working Conditions

Mostly over the road driving with occasional yard time and loading and unloading trucks. 

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

Co-workers in this classification are required to have an advanced understanding and competency in stainless steel welding and grinding operations and blue print reading. Must be able to pass our Craftsman test.

Essential Job Functions

• Perform difficult and unusual manual and machine welding operations in all positions, including layout and fit up
•  Shape, cut or form metal to fabricate complex parts using press brake, shear, roll, dishing machine, flanging equipment and various forming equipment.  Layout, locate and mark bending lines, construct templates and patterns
•  Set up or assist lower classifications in setting up machines
•  Operate mobile crane equipment with the capacity of greater than 20,000 lbs. and directs the rigging and hoisting of equipment
•  Finish grinding where grade and type of abrasive must be determined. Finish and compliance to specifications are critical
•  Perform other duties requiring similar skills and abilities as assigned
•  Guide and train other employees in any classification to improve their skills and perpetuate the trade

Knowledge, Skills, Abilities (Competencies), Education

• Requires considerable skills to fuse dissimilar metals, maximize weld strength, avoid distortion and conform to exacting tolerances and specifications. Must obtain and maintain ASME certifications 
•  Layout, locate and mark bending lines, construct templates and patterns
•  Knowledgeable in physical properties of metal, effects of heat, allowances for thickness, weld shrinkage and welding techniques
•  Ability to read, interpret and work from blueprints, sketches or other specifications with a high degree of proficiency and little or no supervision or direction. 
• Knowledge of product, mechanics, shop mathematics, shop processes and procedures is essential
•  Knowledge of abrasives, conditions of metal and finish are critical

Education and Experience

• High school diploma or equivalent preferred. 
• Basic Blueprint reading, basic welding and basic grinding

Base Compensation Range: $24.25 - $26.75 per hour 

Shift Differential: $2.00 per hour 

Variable Compensation Range:  Incentive bonus eligibility up to 12% of gross annual salary base on company performance (as of 2024).

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

WORK ENVIRONMENT:

Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. Machinery with energy sources including electrical, mechanical, hydraulic, pneumatic, chemical, or other energy.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. While performing the duties of this position, the employee is regularly required to walk, stand, use hands and fingers, handle, grasp or feel; reach with hands and arms climb or balance; stoop, kneel, crouch or crawl. 

Additional effort requirements consist of, but are not limited to, lifting, pushing and pulling material, stairs, and ladders. When there is an occasion to move heavy material greater than 50 pounds, the operator will request assistance from another operator, or utilize provided lifting equipment.

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

The Design Engineer II performs or leads design and layout work, usually for multiple major projects, simultaneously.  This position will support the needs of each project through individual phases and final installation.  Provides guidance and training to Designers and Design Engineers throughout the organization. Improves and utilizes design tools and processes to strategically support continuous improvement.

Essential Job Functions

• Responsible for converting project information (e.g. specifications, general sales order information, data sheets, etc.) into drawings and other documentation that manufacturing then uses to produce a product.
• Responsible for converting design output into ERP records that manufacturing then uses to produce a product.
• Responsible for generating parts lists, requisitions and other ERP records necessary to convert design information into system demands.
• Responsible for various engineering tasks as dictated by projects (e.g., calculations, instrument sizing, or other technical document generation).
• Responsible for review of sales orders, customer specifications, design and calculations to maintain quality of engineering output.
• Responsible for determining and establishing specifications through engineering calculations.
• Evaluate and interpret technical requirements and specifications to provide guidance/direction within the design process.
• Identify deviations in job scope, estimates magnitude of changes, and notifies the appropriate parties.
• Provide technical support for Manufacturing as needed.
• Ensure that design continuity is maintained throughout the entire project.
• Ensure communication flow, both verbal and written, is maintained within engineering and with other design and engineering disciplines.
• Support and troubleshoot assembly and testing processes as they relate to design manufacturability and functionality. 

• Provide timely resolution to issues related to design throughout the production process.
• Provide design support throughout the production processes as needed. Execute quality control procedures.
• Leverage knowledge of Staff Engineer / Lead Engineer in regards to design methodology, skills, and tools. Collaborate with other professional disciplines throughout the business on technical inquires and needs.
• Drive and execute design continuous improvement ideas and projects to improve efficiencies, improve manufacturability and reduce rework. 
• Establish and maintain document control procedures.
• Ensure lessons learned applied to future efforts.
• Perform other related duties as required and assigned.
• Travel including international, could be up to 15% as required by the project or other needs.

• Must have a valid driver’s license.
• Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position.
• The ability to work in a constant state of alertness and safe manner.

Knowledge, Skills, Abilities (Competencies)

• Advanced knowledge of AutoCAD and Inventor.
• Strong computer skills and knowledge of Microsoft Office.
• Knowledge of relevant standards (e.g., ASME).
• Excellent communication skills both orally and written.
• Ability to work independently or in a team.
• Strong interpersonal skills with a mechanical aptitude that allows for effective communication of the product to our customers.
• Manage and prioritize multiple tasks and projects in parallel in a time sensitive environment.
• Show initiative to perform duties beyond assignment-specific duties.
• Knowledge of engineering principles and techniques.
• Knowledge of various fabrication methods and installation procedures.
• Broad understanding of a wide spectrum of materials, their characteristics, tolerances and limitations.
• Broad understanding of the operation of various mechanical systems.

Education and Experience

• Bachelor’s Degree in Engineering, Engineering Technology or similar degree program is required.
• Obtain and maintain a Certificate of Engineer of Responsible Charge per ASME Section VIII Division 1 for at least one scope activity.
• Minimum of two (2) to four (4) years design related experience preferred. 

Base Compensation Range: $71,066 - $111,155 annually 

Variable Compensation Range: Incentive bonus eligibility up to 12% of gross annual salary base on company performance (as of 2024).

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

Professional office environment with some time spent in a manufacturing shop. Use of standard office equipment (computers, phones, copiers, and filing cabinets, etc.). Frequent presence on the manufacturing floor as well as field operations. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. 

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

The Designer II is a mid-level designer position that performs design and layout work, usually for more than one large-scope project and/or smaller-scope projects.

Essential Job Functions

• Convert project information (e.g., specifications, general sales order information, data sheets, etc.) into drawings and other documentation that manufacturing uses to produce a product.
• Generate parts lists, requisitions, and other ERP records necessary to convert design information into system demands.
• Review sales orders and customer specifications.
• Evaluate technical requirements for the economy of construction.
• Identify deviations in job scope, estimate the magnitude of changes, and notify the appropriate parties.
• Provide technical support for Manufacturing.
• Assure that design continuity is maintained throughout the entire project.
• Ensure written and verbal communication is maintained within engineering and with other design and engineering disciplines.

• Ensure accuracy and consistency of drawings by reviewing and verifying technical data and calculations consistent with design quality control procedures.
• Maintain organized and up-to-date project files and project status communication.
• Adhere to company standards and industry best practices for drafting and design.
• Participate in team meetings and contribute to project discussions and brainstorming sessions.
• Leverage knowledge of Designer III regarding design details, modeling practices, drawing development, design for quality, and design for manufacturing and assembly.
• Mentor and guide Designer I, offering support and feedback to enhance their skills and performance.
• Maintain up-to-date knowledge of CAD software and industry trends to apply best practices and innovative solutions.

• Regular, in-person attendance due to necessary teamwork and the personal interactive nature of this position
• Overtime may be necessary and required and is dependent on workload. 
• Perform other related duties as required and assigned.

Knowledge, Skills, Abilities (Competencies)

• Foundational knowledge of relevant standards (e.g., ASME).
• Working knowledge of engineering principles and techniques
• Working knowledge of various fabrication methods and installation procedures
• A broad understanding of our most common materials, their characteristics, and their tolerances and limitations.
• A general understanding of the operation of various mechanical systems.
• Strong AutoCAD and Inventor skills.
• Must be able to work on multiple tasks with little supervision in a fast-paced environment.
• Excellent communication skills both oral and written.
• Shows initiative to perform duties beyond assignment-specific duties.
• Ability to work independently or in a team.
• Ability to establish and maintain working relationships with individuals at all levels.
• Ability to efficiently utilize Microsoft Office.

Education and Experience

• Associate’s Degree in design, drafting, or a similar degree program is preferred. 
• A minimum of two (2) - five (5) years of design experience in pressure vessels, fluid handling systems, or similar industries is required. 

Base Compensation Range: $29.57 - $44.35 hourly. 

Variable Compensation Range: Incentive bonus eligibility up to 12% of gross annual salary base on company performance.

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

Professional office environment with some time spent in a manufacturing shop. Use of standard office equipment (computers, phones, copiers, and filing cabinets, etc.). Frequent presence on the manufacturing floor as well as field operations. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. 

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

The Designer III is a senior level designer position that performs design and layout work, usually for multiple extensive-scope projects. 

Essential Job Functions

• Convert project information (e.g., specifications, general sales order information, data sheets, etc.) into drawings and other documentation that manufacturing uses to produce a product.
• Convert design output into ERP records that manufacturing uses to produce a product.
• Generate parts lists, requisitions, and other ERP records necessary to convert design information into system demands.
• Reviews of sales orders and customer specifications.
• Evaluate technical requirements for economy of construction.
• Identify deviations in job scope, estimate the magnitude of changes, and notify the appropriate parties.
• Provide technical support for manufacturing and regularly review projects with the Quality Inspector and Production Supervisor to ensure design concepts and documentation meet production requirements.
• Assure that design continuity is maintained throughout the entire project.
• Ensure written and verbal communication is maintained within engineering and with other design and engineering disciplines.
• Ensure accuracy and consistency of drawings by reviewing and verifying technical data and calculations consistent with quality control procedures.
• Maintain organized and up-to-date project files and project status communication.
• Adhere to company standards and industry best practices for drafting and design.
• Lead design team meetings and contribute to project discussions and brainstorming sessions.
• Leverage knowledge of Senior Designer regarding design details, modeling practices, drawing development, design for quality, and design for manufacturing and assembly.
• Mentor and guide Designer I/II, offering support and feedback to enhance their skills and performance.
• Maintain up-to-date knowledge of CAD software and industry trends to apply best practices and innovative solutions. 

• Initiate, document, and implement design process improvements to establish and continuously improve best practices.

• Regular, in-person attendance due to necessary teamwork and the personal interactive nature of this position.
• Overtime may be necessary and required and is dependent on workload.
• Performs other related duties as required and assigned.

Knowledge, Skills, Abilities (Competencies)

• Working knowledge of relevant standards (e.g., ASME).
• Proficient knowledge of engineering principles and techniques
• Proficient knowledge of various fabrication methods and installation procedures
• A broad understanding of a wide spectrum of materials, their characteristics, and their tolerances and limitations.
• A general understanding of the operation of various mechanical systems
• Strong AutoCAD and Inventor skills.
• Must be able to work on multiple tasks with little supervision in a fast-paced environment.
• Excellent communication skills both oral and written.
• Shows initiative to perform duties beyond assignment-specific duties.
• Ability to work independently or in a team.
• Ability to establish and maintain working relationships with individuals at all levels.
• Ability to efficiently utilize Microsoft Office.

Education and Experience

• Associates Degree in design, drafting or similar degree program is required.
• Minimum of five (5) – seven (7) years of design experience in pressure vessels, fluid handling systems, or similar industries is required.

Base Compensation Range: $33.71 - $50.56 hourly. 

Variable Compensation Range: Incentive bonus eligibility up to 12% of gross annual salary base on company performance.

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

Professional office environment with some time spent in a manufacturing shop. Use of standard office equipment (computers, phones, copiers, and filing cabinets, etc.). Frequent presence on the manufacturing floor as well as field operations. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. 

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

A Fabricator is responsible for basic cutting, shaping, welding and grinding of metal to form tanks, vessels and their components according to blueprints and specifications, while adhering to quality standards.  This position may have previous experience operating basic hand and power tools.  Additionally, knowledge of painting, sandblasting, shipping, receiving and assembling of products may be required. 

Essential Job Functions

• Operates mobile crane equipment with the capacity of less than 20,000 lbs. and directs the rigging and hoisting of equipment.
• Sets up and operates machines to make production parts to standard shop blueprints.
• Performs welding, grinding and cutting operations in all positions as determined by others.  Care required in blocking, clamping and holding parts to avoid distortion and conform with tolerances and specifications. 
• Grinding where grade and type of abrasives are being determined by others.
• Quarter heads and shells for fit-up and and determine degrees and location of fittings and nozzles.
• Paints where finish or compliance to specifications are critical.
• Operates spray foam insulating, painting, and sandblast equipment.
• Operates machines that require minimal skills and experience, such as presses, shears, saws,rolls, etc.
• Performs various warehouse activities involving receiving, special order and inventory.
• Collaborate with warehouse, production, and logistics teams to ensure efficient, safe loading and unloading operations.
• Ensure safe, timely loading and unloading processes.
• Guide and train coworkers to promote continuous and efficient performance. 
• Maintains a clean work environment.
• Performs other duties requiring similar skills and abilities as assigned.
• Attend and contribute to open book management.
• Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position.
• The ability to work in a constant state of alertness and safe manner.

Knowledge, Skills, Abilities (Competencies)

• Ability to read a tape measure.
• Ability to read, interpret and work from blueprints, sketches or other specifications.
• Ability to promote a safe work environment.
• Ability to take initiative and be a self starter to meet production demands and schedules.
• Ability to work independently and in a team environment.
• Basic mechanical knowledge and ability.
• Knowledge of product, mechanics, shop mathematics, shop processes and procedures.
• Basic knowledge of abrasives, conditions of metal and finish.

Education and Experience

• High school diploma or GED equivalent preferred.
• Experience with trucks under three tons (i.e. tractors and fork-trucks), mobile crane equipment with the capacity of less than 20,000 lbs.and overhead cranes.
• Satisfactorily complete the following one of the Company training programs or pass equivalent tests.  (These requirements will be waived by the Company if an employee can demonstrate they can successfully perform the duties.) 

1.           Basic blueprint reading.

2.           Basic welding.

3.           Basic grinding.

4.           Additional technical skills

Base Compensation Range: $19.00 - $20.80 per hour 

Shift Differential: $2.00 per hour 

Variable Compensation Range:  Incentive bonus eligibility up to 10% of gross annual salary base on company performance (as of 2024).

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

WORK ENVIRONMENT:

Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. Machinery with energy sources including electrical, mechanical, hydraulic, pneumatic, chemical, or other energy.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. While performing the duties of this position, the employee is regularly required to walk, stand, use hands and fingers, handle, grasp or feel; reach with hands and arms climb or balance; stoop, kneel, crouch or crawl. 

Additional effort requirements consist of, but are not limited to, lifting, pushing and pulling material, stairs, and ladders. When there is an occasion to move heavy material greater than 50 pounds, the operator will request assistance from another operator, or utilize provided lifting equipment.

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

Not sure what to apply for? We can help!
Answer a few quick questions and we'll reach out to discuss openings that may fit your skills and interests.
Make an impact while a living building equipment used by industry-leading companies around the globe. 

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

The Edge is for individuals exploring career options and those who are seeking practical work experience to find their best fit. The Edge is open to individuals who are transitioning through high school, vocational training programs, community colleges, or universities. Participating in The Edge will help students build new skills, work in a professional environment, and make a career choice. 

THE EDGE INTERNSHIP PROGRAM 

The Edge Internship Program is open to students currently enrolled in sophomore, junior, or senior college courses. It offers paid employment from May through August with a wide variety of placement opportunities such as Engineering, Marketing, Human Resources, Supply Chain, Manufacturing, etc. If available, the position may provide other employment opportunities throughout the year. 

THE EDGE SUMMER EMPLOYMENT PROGRAM 

The Edge Summer Employment Program offers paid positions from May through August for individuals (at least 17 years of age) who aren’t sure that college is for them or have the desire to bridge semester gaps while attending college. The Edge Summer Employment Program offers placement for entry-level work in manufacturing and office environments. These opportunities provide real-life experience to assist individuals with lifelong readiness and career aspirations. 

When joining Mueller, you will benefit from a team that values a positive culture, prioritizes safety, invites diversity, encourages continuous improvement, and is committed to a world-class customer experience. Come, explore The Edge of possibilities at Paul Mueller Company!

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

The Lead Engineer provides guidance and direction on process and structural engineering analysis, calculations and design of all specialized and Engineered to Order (ETO) products.

This position will oversee all project direction from an engineering perspective as well as analyze and provide solutions to challenges. This position will provide guidance and training to all other engineers throughout the organization.  The Lead Engineer supervises, supports, trains and develops other engineers or technically disciplined coworkers.

Essential Job Functions

• Responsible for coaching, teaching, and supervision of assigned personnel.
• Responsible for effective employee relations. Initiates and is proactive with employee coaching and development. Resolves employee issues through identifying problems and resolutions. 
• Provide on-site leadership for project team by building and motivating team members to meet project goals while adhering to their responsibilities and project milestones.  
• Responsible for the performance management (hiring, development, discipline, termination) of direct reports while collaborating with Human Resources.
• Responsible for building and maintaining business relationships, which includes working with all levels of the organization.
• Work cross-functionally with others and lead meetings to determine needs, evaluate project progress, troubleshoot challenges, and execute according to the assigned to project.   
• Assess current team capabilities and identify skill gaps. Lead the recruitment, selection, and onboarding of engineering personnel to meet project demands. Provide mentorship, training, development, and succession planning for engineering staff.
• Provide mechanical engineering analysis and specification (e.g. process, structural).
• Performs and/or monitors the preparation of design output (e.g. drawings, datasheets, specs.).
• Performs and/or monitors the review of design output to assure project requirements are fulfilled.
• Performs and/or monitor the preparation and quality of engineering output (e.g. ASME calculation reports, support reactions, process estimates, specifications).
• Develop and communicate plans for project execution.
• Establish and maintain document control procedures.
• Oversee transition and assignment of new projects to direct reports.
• Support and troubleshoot assembly and testing processes as they relate to design manufacturability and functionality. 
• Provide timely resolution to issues related to process, design and/or structural engineering throughout the production process.
• Provide advanced process, design and structural support throughout the production processes as needed.
• Collaborate with other professional disciplines throughout the business on technical inquires and needs.
• Drive and execute continuous improvement ideas and projects to improve efficiencies, improve manufacturability and reduce rework. 
• Provide strategic direction for engineering projects, ensuring that solutions are innovative, scalable, and aligned with industry best practices.
• Support a culture of innovation and continuous improvement within the engineering team. Stay updated with the latest industry trends, tools, and technologies to maintain the company's competitive edge.
• Provide training to direct personnel and customers as needed. 
• Travel including international, could be up to 15% as required by the project or other needs.
• Perform other duties and take on other responsibilities as required.
• Must have a valid driver’s license. 
• Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position
• The ability to work in a constant state of alertness and safe manner.

Knowledge, Skills, Abilities (Competencies)

• Leadership skills to lead, develop, and coach others in a proactive manner.
• Knowledge of principles and procedures for employee selection, development, and training.
• Proficiency with Microsoft Office.
• Proficient verbal and written communication skills
• Self-motivated attitude with the ability to multitask with little supervision and thrive in a timeline-driven environment
• Exceptional work ethics and initiative, ensuring all task are followed through in a fast‐paced and diversified work environment
• Ability to work individually or as part of a team
• Exceptional organization and planning skills.
• Exceptional technical customer service skills.
• Advanced experience in heat transfer analysis, fluid mechanics, and process system design as applicable.
• Experience with beverage processing equipment design as applicable.
• Experience with agitation processes, design and/or process design with skidded systems as applicable.
• Experience with Finite Element Analysis (FEA) and other structural analysis software (e.g. Compress) as applicable.
• Advanced experience with AutoCAD and Inventor as applicable.
• Advanced knowledge of relevant standards (e.g. ASME) as applicable.
• Knowledge of estimating, construction costs, scheduling, purchasing, engineering principles and techniques, and various construction methods and installation procedures
• Broad understanding of a wide spectrum of materials, their characteristics, tolerances and limitations.

Education and Experience

• Bachelor’s Degree in Engineering or similar degree program is required. 
• Professional Engineering License is required.
• Obtain and maintain a Certificate of Engineer of Responsible Charge per ASME Section VIII Division 1 for two or more scope activities as applicable.
• Minimum of seven (7) or more years of experience in a process and structural engineering related field is required.

Base Compensation Range: $121,990 - $208,667 annually 

Variable Compensation Range: Incentive bonus eligibility up to 12% of gross annual salary base on company performance (as of 2024).

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

Professional office environment with some time spent in a manufacturing shop. Use of standard office equipment (computers, phones, copiers, and filing cabinets, etc.). Frequent presence on the manufacturing floor as well as field operations. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. 

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

The Manufacturing Engineer I is responsible for developing, designing, implementing and managing tooling, processes and procedures. This position will train all personnel on improvements or implementation of tooling, processes and procedures. This position is responsible for managing one or more projects that may include large capital expenditures or cost saving initiatives that positively impact safety, maintenance, quality, on time delivery (OTD), efficiency and inventory. The Manufacturing Engineer will support manufacturing for all types of continuous improvement activities and may also participate on or co-lead continuous improvement events. This position will also assist in the execution of Engineered to Order (ETO) sold projects as they are shared between design and manufacturing processes. 

Essential Job Functions

• Design, justify, implement and manage capital projects including machine and fixturing purchases, shop floor layout designs, material handling equipment, product troubleshooting, etc. 
• Develop training materials and train all personnel on improved or new tooling, machines, processes and procedures.
• Create and execute improvements to achieve goals established in Key Performance Indicators (KPIs). 
• Utilize scorecard performance and key metrics to prioritize efforts on tasks and projects. 
• Use real-time problem-solving tools to implement root cause solutions surrounding safety, quality, OTD, productivity, efficiency, cost savings, etc. 
• Support new product development and ETO projects ensuring successful manufacturability. 
• Implement and maintain 5S and housekeeping efforts throughout manufacturing and in collaboration with direct personnel.

• Collaborate with the hourly production coworkers to improve their daily work as needed or required.
• Collaborate and build relationship with Planners and Engineering to maintain routers in JDE to support accurate costing and profitability.
• Collaborate and build relationships with other professional disciplines throughout the business on technical inquiries and needs. 

• Collaborate and build relationships with sales and marketing to develop new product offerings in a research and development capacity. 
• Provide training and guidance to other Manufacturing Engineering Technicians as needed.
• Leverage knowledge of Manufacturing Engineer II in regards to design methodology, skills, and tools.

• Travel including international, could be up to 15% as required by the project or other needs.

• Must have a valid driver’s license
• Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position
• The ability to work in a constant state of alertness and safe manner.

Knowledge, Skills, Abilities (Competencies)

• Metal forming, welding, grinding, machining, manufacturing, including general CAM and/or layout experience.
• Must have a thorough understanding of drafting and knowledge of engineering principals and techniques including various sheet metal fabrication processes and installation procedures
• Knowledge of Lean manufacturing knowledge or related concepts. 

• Ability to work well under pressure and manage time effectively in a constantly changing and time sensitive environment while prioritizing multiple tasks in parallel.

• Excellent communication skills both orally and written with keen attention to detail.
• Ability to take initiative to develop new strategies and outside-the-box ideas.
• Self-starter and goal oriented who will aggressively pursue successful resolution of safety risks in a timely manner.
• Ability to work independently or collaboratively with a team.
• Ability to establish and maintain working relationships with individuals at all levels of the organization.
• Strong interpersonal skills with a mechanical aptitude.
• Ability to efficiently utilize Microsoft Office. AutoCAD experience required.

Education and Experience

• Bachelor of Science in Engineering or similar degree program is required.

One (1) to three (3) years related experience preferred.

Base Compensation Range: $59,159 - $88,739 annually 

Variable Compensation Range: Incentive bonus eligibility up to 12% of gross annual salary base on company performance.

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

Professional office environment with some time spent in a manufacturing shop. Use of standard office equipment (computers, phones, copiers, and filing cabinets, etc.). Frequent presence on the manufacturing floor as well as field operations. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. 

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

The Production Supervisor position plans and directs all manufacturing duties for a business unit including the direct supervision of hourly employees.  This position is responsible for the safety of their team and quality and efficiencies of the product.  The Production Supervisor plans and assigns work, enforces company policies and procedures, drives continuous improvement, and mentors and develops hourly employees. 

 Essential Job Functions

• Responsible for coaching, teaching, and supervision of assigned personnel.
• Responsible for effective employee relations. Initiates and is proactive with employee coaching and development. Resolves employee issues through identifying problems and resolutions. 
• Provide on-site leadership for project team by building and motivating team members to meet project goals while adhering to their responsibilities and project milestones. 
• Responsible for the performance management (hiring, development, discipline, termination) of direct reports while collaborating with Human Resources.
• Responsible for building and maintaining business relationships, which includes working with all levels and organizations of the company to maintain and provide status of key projects.
• Manages manufacturing product line staff including monitoring, evaluating, counseling, disciplining, and appraising job performance. 
• Promote a culture that emphasizes safety for all activities.  In the case of a safety incident or injury, perform investigations and execute corrective actions in a timely manner.
• Inform and train hourly employees on required safety topics, processes, and procedures. 
• Balance quality, productivity, cost, safety and morale to achieve positive results in all areas. 
• Complete timekeeping, absenteeism, and attendance related corrective actions in a timely manner. 
• Organize, prioritize, plan and establish work schedules, assignments, & production sequences to meet. 
• Define and drive continuous improvement in area to improve business results and process repeatability. 
• Manage and maintain housekeeping and 5S. 
• Create and manage departmental performance measures, including visual controls and Key Performance Indicators (KPI’s). 
• Communicate with Planning daily to ensure adequate maintenance of proper inventory levels, delivery schedules, and production needs to successfully achieve the project schedule. 
• Assist with managing product line financials including participation in Open Book Management.
• Collaborate with other supervisors to coordinate operations and labor activities between product lines as necessary.
• Ensure lessons learned applied to future efforts.
• The ability to work in a constant state of alertness and safe manner.
• Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position.
• Perform other related duties, as needed and assigned, including backup for other department personnel, to ensure support of the production plan.

 Knowledge, Skills, Abilities (Competencies)

• Leadership skills to lead, develop, and coach others in a proactive manner.
• Knowledge of principles and procedures for employee selection, development, and training.
• Excellent communication skills both orally and written.
• Experience with technologies and best practices across multiple platforms.
• Ability to work well under pressure and manage time effectively, prioritize and multitask in a constantly changing environment.
• Ability to take initiative to develop new strategies and outside-the-box ideas.
• Ability to work independently or in a team with demonstration of excellent leadership skills.
• Ability to establish and maintain working relationships with individuals at all levels.
• Ability to analyze difficult situations and react in a timely manner.
• Computer skills using Microsoft Office, ERP systems, JDE, Project Management, CRM systems, and scheduling software such as MS Project or Primavera P6.
• Self-starter and goal oriented who will aggressively pursue order management issues for successful resolution in a timely manner.
• Strong interpersonal skills and organization skills with a mechanical aptitude that allows for effective communication of the product to our customers.
• Possess a working knowledge of master scheduling of a finished product with multiple levels of processes required to reach the finished stage.
• Possess a working knowledge of engineering prints and manufacturing capacity to effectively determine need dates for components.
• Knowledge of the master data that drives forecasting, planning, scheduling, and shipping within an ERP system.

 Education and Experience

• A Bachelor of Science Degree in Engineering, Materials Management or other degree fields are preferred.  High School Diploma required. 
• A minimum of three (3) years related experience in manufacturing or production is required for this position.

Base Compensation Range: $59,159 - $88,739 annually

Variable Compensation Range: Incentive bonus eligibility up to 12% of gross annual salary base on company performance (as of 2024).

 Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

 Working Conditions

Manufacturing shop environment. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. Machinery with energy sources including electrical, mechanical, hydraulic, pneumatic, chemical, or other energy.

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

The Production Supervisor position plans and directs all manufacturing duties for a business unit including the direct supervision of hourly employees.  This position is responsible for the safety of their team and quality and efficiencies of the product.  The Production Supervisor plans and assigns work, enforces company policies and procedures, drives continuous improvement, and mentors and develops hourly employees. 

 Essential Job Functions

• Responsible for coaching, teaching, and supervision of assigned personnel.
• Responsible for effective employee relations. Initiates and is proactive with employee coaching and development. Resolves employee issues through identifying problems and resolutions. 
• Provide on-site leadership for project team by building and motivating team members to meet project goals while adhering to their responsibilities and project milestones. 
• Responsible for the performance management (hiring, development, discipline, termination) of direct reports while collaborating with Human Resources.
• Responsible for building and maintaining business relationships, which includes working with all levels and organizations of the company to maintain and provide status of key projects.
• Manages manufacturing product line staff including monitoring, evaluating, counseling, disciplining, and appraising job performance. 
• Promote a culture that emphasizes safety for all activities.  In the case of a safety incident or injury, perform investigations and execute corrective actions in a timely manner.
• Inform and train hourly employees on required safety topics, processes, and procedures. 
• Balance quality, productivity, cost, safety and morale to achieve positive results in all areas. 
• Complete timekeeping, absenteeism, and attendance related corrective actions in a timely manner. 
• Organize, prioritize, plan and establish work schedules, assignments, & production sequences to meet. 
• Define and drive continuous improvement in area to improve business results and process repeatability. 
• Manage and maintain housekeeping and 5S. 
• Create and manage departmental performance measures, including visual controls and Key Performance Indicators (KPI’s). 
• Communicate with Planning daily to ensure adequate maintenance of proper inventory levels, delivery schedules, and production needs to successfully achieve the project schedule. 
• Assist with managing product line financials including participation in Open Book Management.
• Collaborate with other supervisors to coordinate operations and labor activities between product lines as necessary.
• Ensure lessons learned applied to future efforts.
• The ability to work in a constant state of alertness and safe manner.
• Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position.
• Perform other related duties, as needed and assigned, including backup for other department personnel, to ensure support of the production plan.

 Knowledge, Skills, Abilities (Competencies)

• Leadership skills to lead, develop, and coach others in a proactive manner.
• Knowledge of principles and procedures for employee selection, development, and training.
• Excellent communication skills both orally and written.
• Experience with technologies and best practices across multiple platforms.
• Ability to work well under pressure and manage time effectively, prioritize and multitask in a constantly changing environment.
• Ability to take initiative to develop new strategies and outside-the-box ideas.
• Ability to work independently or in a team with demonstration of excellent leadership skills.
• Ability to establish and maintain working relationships with individuals at all levels.
• Ability to analyze difficult situations and react in a timely manner.
• Computer skills using Microsoft Office, ERP systems, JDE, Project Management, CRM systems, and scheduling software such as MS Project or Primavera P6.
• Self-starter and goal oriented who will aggressively pursue order management issues for successful resolution in a timely manner.
• Strong interpersonal skills and organization skills with a mechanical aptitude that allows for effective communication of the product to our customers.
• Possess a working knowledge of master scheduling of a finished product with multiple levels of processes required to reach the finished stage.
• Possess a working knowledge of engineering prints and manufacturing capacity to effectively determine need dates for components.
• Knowledge of the master data that drives forecasting, planning, scheduling, and shipping within an ERP system.

 Education and Experience

• A Bachelor of Science Degree in Engineering, Materials Management or other degree fields are preferred.  High School Diploma required. 
• A minimum of three (3) years related experience in manufacturing or production is required for this position.

Base Compensation Range: $59,159 - $88,739 annually

Variable Compensation Range: Incentive bonus eligibility up to 12% of gross annual salary base on company performance.

 Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

 Working Conditions

Manufacturing shop environment. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. Machinery with energy sources including electrical, mechanical, hydraulic, pneumatic, chemical, or other energy.

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

We are currently searching for a Production Employee for our Springfield MO Facility.  Co-workers in this classification are required to have an entry level knowledge of ordinary manufacturing operations.

Essential Job Functions

• Assist Craftsmen, Fabricators and other Production Workers as required
• Operates equipment (rolls, shears, brakes, forming equipment, etc.) that is repetitive in nature, requires minimal or routine set up, or set up is performed by someone else
• Perform routine painting where finish or compliance to specifications are not critical
• Prepare parts and equipment for shipment by packing, boxing, crating and loading
• Build, assemble, test and repair Components, Subassemblies and Assemblies, etc.
• Cuts up scrap using equipment such as shears, manual Plasma cutters, ironworkers, etc.
• Tack and flat welds (non-ASME)
• Perform calibration of vessels
• Grind, deburr, bevel and otherwise prepare edges or surfaces of material
• Quarter heads and shell
• Perform all shipping, receiving and warehouse functions
• Operate trucks under three tons, tractors and fork-trucks
• Basic computer use limited to locating and issuing parts
• Proficient in performing various jobs within the scope of standard products, such as, but not limited to, piping, electrical, repair work, fabricating, performing general welding and finishing operations, minor maintenance, painting, and sand blast
• The ability to work in a constant state of alertness and safe manner
• Perform other duties requiring similar skills and abilities as assigned

Knowledge, Skills, Abilities (Competencies)

• Ability to read a tape measure
• Basic blueprint reading knowledge
• Basic math skills

Education and Experience

• HS diploma or GED equivalent preferred. 

Base Compensation Range: $16.90 - $18.64 per hour 

Shift Differential: $2.00 per hour 

Variable Compensation Range:  Incentive bonus eligibility up to 12% of gross annual salary base on company performance (as of 2024).

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

WORK ENVIRONMENT:

Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. Machinery with energy sources including electrical, mechanical, hydraulic, pneumatic, chemical, or other energy.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. While performing the duties of this position, the employee is regularly required to walk, stand, use hands and fingers, handle, grasp or feel; reach with hands and arms climb or balance; stoop, kneel, crouch or crawl. 

Additional effort requirements consist of, but are not limited to, lifting, pushing and pulling material, stairs, and ladders. When there is an occasion to move heavy material greater than 50 pounds, the operator will request assistance from another operator, or utilize provided lifting equipment.

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

Summary

The Regional Sales Manager is responsible for direct sales of assigned products within the Refrigeration product line, typically through our established customer and where applicable the dealer network. The individual in this position must have a broad technical knowledge of the Company’s products by virtue of technical education and experience. This position requires working with Dealers, as well as end customers, defining technical capabilities, application suitability, process requirements, system design considerations, defining specifications, etc., as needed in selling the Company’s products. The individual must exercise considerable independent technical and commercial judgment over sales projects within an assigned region of the division. The position requires up to 50% to 75% travel including foreign travel for customer presentations, sales support and service consultation is required.

Essential Job Functions

• Grow the sales volume within the assigned region
• Meet target profitability goals within the assigned region
• When applicable, manage the Dealers in assigned region maintaining regular contact with them and customers regarding proposals, orders, service requirements, future equipment needs.
• Provide sales, product and application training to direct customers and dealers.
• Perform regular analysis and performance evaluation for each customer and dealer within assigned region.
• Conduct presentations for Customers and Dealers including all technical aspects of the project, pricing, payment terms and shipping schedules.
• Read, understand and negotiate Terms and Condition for orders.
• Understand requirements and propose suitable solutions.
• Review and negotiate settlement of customer complaints in cooperation with other personnel on aftermarket and warranty issues.
• Develop annual sales plans and expense budgets in assigned region and be an active participant in forecasting and open book management.
• Perform service of equipment when appropriate and required.
• Perform other duties as assigned by the General Manager or National Sales Manager.
• Support Heat Transfer as needed for quoting assistance
• Assist in developing sales promotions, advertising strategy and trade shows both within assigned territory and outside this territory.
• Travel up to 50% to 75% of the time including foreign and domestic.
• Must possess a valid Motor Vehicle Operator’s license and may provide own vehicle for on-the job transportation purposes, as applicable.

Knowledge, Skills, Abilities (Competencies)

• Basic knowledge of refrigeration is required. 
• Effective use of common computer hardware and proprietary PMC software is required.
• Basic knowledge of heat-transfer, refrigeration and related math skills.   
• Ability to communicate effectively in a sales office environment.
• Management skills suitable to dealing with large numbers of customer orders is required. 
• Team player able to work closely with colleagues. 
• Strong motivational and sales skills
• Ability to effectively deal with Manufacturer’s Representatives and customers and solve their problems.
• Positive attitude
• Presents a professional company image
• Working knowledge of Microsoft Office
• Must be able to make sound business decisions through effective coordination of multiple tasks, while maintaining an acceptable level of performance.
• Able to establish and monitor critical dates for performance of duties.

Education and Experience

Preferred candidates possess a college degree in Ag, engineering, marketing or business with experience in refrigeration related sales. Candidates with technical aptitude and strong experience but lesser educational backgrounds will be eligible. The successful candidate will be goal oriented self-motivated, organized, disciplined and able to multitask.

Base Compensation Range: $63,736 - $99,691 annually

Variable Commission Plan: Competitive annual plan with quarterly payout

Variable Compensation Range: Incentive bonus eligibility up to 12% of gross annual salary based on company performance.

 Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

 WORK ENVIRONMENT:

Professional office environment with some time spent in the manufacturing area.  Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. Machinery with energy sources including electrical, mechanical, hydraulic, pneumatic, chemical, or other energy.

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

The Senior Maintenance Specialist works as part of a team performing preventative maintenance and mechanical or electrical repairs on machinery, vehicle or facility repairs. This position is responsible for leadership and mentorship of Maintenance Specialists and Technicians. 

Essential Job Functions

• Perform regular preventative maintenance. 
• Maintain housekeeping of maintenance area and work site areas. 
• Perform repairs on machinery, vehicles, or facility as required. 
• Determine degree of damage to item to be repaired. Disassemble item and list parts necessary for repair. 
• Replace parts and repair any defective metal parts which need welding.
• Operate equipment to verify safe, effective repair.
• Design fixtures, tooling and fixtures as required to meet custom needs.
• Repair hand tools - production tools and maintenance tools.
• Troubleshoot and repair defective mechanical or electrical parts.
• Install equipment - both new and existing where new plant layouts are needed.
• Coordinate with area supervisors regarding work which is being conducted on equipment which might impact safety and/or production.
• All other duties as assigned. 
• The ability to work in a constant state of alertness and safe manner.
• Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position.
• Overtime is a mandatory condition of employment and frequent in this position.

• Complete tasks, work orders, and projects as assigned and regularly meets deadlines.     
• Use of hand tools and machinery is required to maintain equipment and buildings.
• Troubleshoot and repair all electrical and mechanical problems on machinery plant wide.
• Maintain Arc flash and LOTO training.
• Direct and train others as needed and required. 
• Use of organizational and planning techniques to maximize productivity and efficiency of personnel.
• Performs a lead role in influencing others and shares best practices.
• Driver’s license required.

Knowledge, Skills, Abilities (Competencies)

• Ability to effectively train team members in a way that is understood by the trainee. 
• Ability to work with and around moving equipment/machines.
• Ability to take initiative to develop outside-the-box ideas.
• Ability to work independently or in a team.
• Ability to establish and maintain working relationships with individuals at all levels as well as external vendors.

• Ability to use critical thinking skills for troubleshooting issues.
• Excellent communication skills.
• Self-starter and goal oriented.
• Manage and prioritize multiple tasks and projects in parallel in a time sensitive environment.
• Basic electrical knowledge for machinery.
• Basic welding knowledge.
• Advanced knowledge of hydraulic and pneumatic repair.
• Advanced knowledge of manufacturing equipment and tooling.
• Must be able to read manuals and technical documents. 
• Must be able to operate powered industrial vehicles and aerial lifts and maintain license. 
• OSHA 10 preferred.

• Ability to use a computer and efficiently utilize platforms such as Microsoft Office. 

Education and Experience

• High school diploma or GED equivalent.
• Five + years’ previous experience in manufacturing, maintenance, and/or electrical required. 
• All requirements for the Maintenance Specialist position must be completed prior to entry into the Senior Maintenance Specialist position.

Base Compensation Range: $30.75 - $34.70 per hour 

Shift Differential: 10% 

Variable Compensation Range:  Incentive bonus eligibility up to 12% of gross annual salary base on company performance.

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

WORK ENVIRONMENT:

Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. Machinery with energy sources including electrical, mechanical, hydraulic, pneumatic, chemical, or other energy.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. While performing the duties of this position, the employee is regularly required to walk, stand, use hands and fingers, handle, grasp or feel; reach with hands and arms climb or balance; stoop, kneel, crouch or crawl.

Additional effort requirements consist of, but are not limited to, lifting, pushing and pulling material, stairs, and ladders. When there is an occasion to move heavy material greater than 50 pounds, the operator will request assistance from another operator, or utilize provided lifting equipment.

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

Employees in this classification are required to have an intermediate level knowledge of ordinary machine shop operations.

Essential Job Functions

• Operate machine shop equipment including band saws, belt sanders, blast cabinet, lathes, mills, drill presses and punching equipment where operations are directed by others
• Deliver parts to other departments with a scooter and/or fork truck
• Load and unload trucks delivering raw material
• Mark incoming material with part number and heat code 
• Stock material in raw material racks 
• Load, unload and/or deliver long, heavy and otherwise awkward loads
• Perform sandblasting operations
• Perform routine preventive maintenance on equipment and vehicles
• Cycle count inventory
• Assist Material Coordinator in miscellaneous job tasks as directed
• Spray for weeds in the raw material yard
• Ability to work in a constant state of alertness and safe manner
• Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position
• Overtime is a mandatory condition of employment and frequent in this position

Knowledge, Skills, Abilities (Competencies)

• Knowledge of Paul Mueller Company general work procedures in regards to marking and tagging material with proper work order number and heat codes as required
• Basic blueprint reading knowledge
• Basic math skills
• Ability to setup and cut different degrees of angles
• Ability to read a tape measure 
• Strong understanding of safe work practices in regards to fork truck operations

Education and Experience

• HS diploma or GED equivalent preferred
• Previous Machine Shop experience or related technical training

Base Compensation Range: $19.50 - $22.25 per hour 

Shift Differential: 10% 

Variable Compensation Range:  Incentive bonus eligibility up to 12% of gross annual salary base on company performance.

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

WORK ENVIRONMENT:

Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. Machinery with energy sources including electrical, mechanical, hydraulic, pneumatic, chemical, or other energy.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. While performing the duties of this position, the employee is regularly required to walk, stand, use hands and fingers, handle, grasp or feel; reach with hands and arms climb or balance; stoop, kneel, crouch or crawl. 

Additional effort requirements consist of, but are not limited to, lifting, pushing and pulling material, stairs, and ladders. When there is an occasion to move heavy material greater than 50 pounds, the operator will request assistance from another operator, or utilize provided lifting equipment.

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

The Senior Staff Engineer is a senior technical contributor who provides process and structural engineering analysis, calculations and design of specialized and Engineered To Order (ETO) products. This position allows for a wide degree of creativity and latitude to take the lead on high-impact, complex projects.  The Senior Staff Engineer will oversee project direction from an engineering perspective as well as analyze and provide solutions to challenges.  This position is responsible for selection and maintenance of engineering tools, processes and procedures. This position will provide guidance and training to other engineers throughout the organization.  This position supervises, supports, trains and develops other engineers or technically disciplined coworkers.

Essential Job Functions

• Responsible for coaching, teaching, and supervision of assigned personnel.
• Responsible for effective employee relations. Initiates and is proactive with employee coaching and development. Resolves employee issues through identifying problems and resolutions. 
• Provide on-site leadership for project team by building and motivating team members to meet project goals while adhering to their responsibilities and project milestones.  
• Responsible for the performance management (hiring, development, discipline, termination) of direct reports while collaborating with Human Resources.
• Responsible for building and maintaining business relationships, which includes working with all levels of the organization.
• Work cross-functionally with others and lead meetings to determine needs, evaluate project progress, troubleshoot challenges, and execute according to the assigned to project.   
• Generate and distribute all process and/or structural discipline engineering information needed to construct and execute a project.
• Effective, frequent interaction with sales, purchasing, estimating, manufacturing, suppliers, and customers.
• Review sales orders, specifications, and cost estimates to assure process, design and/or structural output fulfills requirements.
• Prepare design calculations and perform or direct the preparation of drawings and design documents.
• Review all drawings and specifications and ensure they properly relate to the estimate.
• Oversee transition and assignment of new projects to direct reports.
• Support and troubleshoot assembly and testing processes as they relate to design manufacturability and functionality. 
• Provide timely resolution to issues related to process, design and/or structural engineering throughout the production process.
• Provide advanced process, design and/or structural support throughout the production processes as needed.
• Leverage knowledge of Lead Engineer in regards to process, design and/or structural methodology, skills, and tools Collaborate with other professional disciplines throughout the business on technical inquires and needs.

• Drive and execute continuous improvement ideas and projects to improve efficiencies, improve manufacturability and reduce rework. 
• Take ownership of key projects, leading them from concept to completion. Ensure project milestones are met, issues are resolved, and designs are aligned with scope requirements.
• Support sales and estimating to evaluate customers' technical design requirements and develop a proposed solution during the quoting process.
• Act as a subject matter expert in one or more aspects of design guiding co-workers to solve critical problems.
• Establish and maintain document control procedures.

• Provide training to direct personnel and customers as needed. 
• Travel including international, could be up to 15% as required by the project or other needs.
• Ensure lessons learned applied to future efforts.
• Perform other related duties as required and assigned.
• Must have a valid driver’s license. 
• Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position.
• The ability to work in a constant state of alertness and safe manner.

Knowledge, Skills, Abilities (Competencies)

• Leadership skills to lead, develop, and coach others in a proactive manner.
• Knowledge of principles and procedures for employee selection, development, and training.
• Proficiency with Microsoft Office.
• Proficient verbal and written communication skills
• Self-motivated attitude with the ability to multitask with little supervision and thrive in a timeline-driven environment
• Exceptional work ethics and initiative, ensuring all task are followed through in a fast‐paced and diversified work environment
• Ability to work individually or as part of a team
• Exceptional organization and planning skills.
• Exceptional technical customer service skills.
• Advanced experience in heat transfer analysis, fluid mechanics and process system design as applicable.
• Experience with beverage processing equipment design as applicable.
• Experience with agitation processes, design and/or process design with skidded systems as applicable.
• Experience with Finite Element Analysis (FEA) and other structural analysis software (e.g. Compress) as applicable.
• Advanced experience with AutoCAD and Inventor as applicable.
• Advanced knowledge of relevant standards (e.g. ASME) as applicable.
• Knowledge of estimating, construction costs, scheduling, purchasing, engineering principles and techniques, and various construction methods and installation procedures.
• Broad understanding of a wide spectrum of materials, their characteristics, tolerances and limitations.

Education and Experience

• Bachelor’s Degree in Engineering or similar degree program is required. 
• Professional Engineering License is required and/or must be obtained within one (1) year of accepting the position.
• Obtain and maintain a Certificate of Engineer of Responsible Charge per ASME Section VIII Division 1 for two or more scope activities as applicable. 

• Minimum of seven (7) or more years of experience in a process and structural engineering related field is required. 

Base Compensation Range: $89,579 - $145,421 annually 

Variable Compensation Range: Incentive bonus eligibility up to 12% of gross annual salary base on company performance (as of 2024).

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

Professional office environment with some time spent in a manufacturing shop. Use of standard office equipment (computers, phones, copiers, and filing cabinets, etc.). Frequent presence on the manufacturing floor as well as field operations. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. 

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

The Staff Engineer is a senior contributor who provides process and structural engineering analysis, calculations and design of specialized and Engineered To Order (ETO) products. This position allows for a wide degree of creativity and latitude to take the lead on high-impact, complex projects.  The Staff Engineer will oversee project direction from an engineering perspective as well as analyze and provide solutions to challenges. This position will provide guidance and training to other engineers throughout the organization.  

Essential Job Functions

• Generate and distribute all process and/or structural discipline engineering information needed to construct and execute a project.
• Effective, frequent interaction with sales, purchasing, estimating, manufacturing, suppliers, and customers.
• Review sales orders, specifications, and cost estimates to assure process, design and/or structural output fulfills requirements.
• Prepare design calculations and perform or direct the preparation of drawings and design documents.
• Review all drawings and specifications and ensure they properly relate to the estimate.
• Support and troubleshoot assembly and testing processes as they relate to design manufacturability and functionality. 
• Provide timely resolution to issues related to process, design and/or structural engineering throughout the production process.
• Provide advanced process, design and/or structural support throughout the production processes as needed.
• Provides training and guidance to Designers and Design Engineers.
• Leverage knowledge of Senior Staff Engineer / Lead Engineer in regards to process, design and/or structural methodology, skills, and tools Collaborate with other professional disciplines throughout the business on technical inquires and needs.

• Drive and execute continuous improvement ideas and projects to improve efficiencies, improve manufacturability and reduce rework. 
• Take ownership of key projects, leading them from concept to completion. Ensure project milestones are met, issues are resolved, and designs are aligned with scope requirements.
• Support sales and estimating to evaluate customers' technical design requirements and develop a proposed solution during the quoting process.
• Act as a subject matter expert in one or more aspects of design guiding co-workers to solve critical problems.
• Establish and maintain document control procedures.

• Provide training to direct personnel and customers as needed. 
• Travel including international, could be up to 15% as required by the project or other needs.
• Ensure lessons learned applied to future efforts.
• Perform other related duties as required and assigned.
• Must have a valid driver’s license 
• Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position.
• The ability to work in a constant state of alertness and safe manner.

Knowledge, Skills, Abilities (Competencies)

• Proficiency with the Microsoft Office.
• Proficient verbal and written communication skills
• Self-motivated attitude with the ability to multitask with little supervision and thrive in a timeline-driven environment
• Exceptional work ethics and initiative, ensuring all task are followed through in a fast‐paced and diversified work environment
• Ability to work individually or as part of a team
• Advanced organization and planning skills.
• Advanced technical customer service skills.
• Advanced in heat transfer analysis, fluid mechanics, and process system design as applicable.
• Experience with beverage processing equipment design as applicable.
• Experience with agitation processes, design and/or process design with skidded systems as applicable.
• Experience with Finite Element Analysis (FEA) and other structural analysis software (e.g., Compress) as applicable.
• Advanced experience with AutoCAD and Inventor as applicable.
• Advanced knowledge of relevant standards (e.g., ASME) as applicable.
• Knowledge of estimating, construction costs, scheduling, purchasing, engineering principles and techniques, and various construction methods and installation procedures.
• Broad understanding of a wide spectrum of materials, their characteristics, tolerances and limitations.

Education and Experience

• Bachelor’s Degree in Engineering or similar degree program is required. 
• Professional Engineering License is required and/or must be obtained within one (1) year of accepting the position.
• Obtain and maintain a Certificate of Engineer of Responsible Charge per ASME Section VIII Division 1 for two or more scope activities as applicable.
• Minimum of five (5) or more years of experience in a process and structural engineering related field is preferred. 

Base Compensation Range: $79,949 - $125,049 annually 

Variable Compensation Range: Incentive bonus eligibility up to 12% of gross annual salary base on company performance (as of 2024).

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

Professional office environment with some time spent in a manufacturing shop. Use of standard office equipment (computers, phones, copiers, and filing cabinets, etc.). Frequent presence on the manufacturing floor as well as field operations. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. 

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.

The Treasury and Tax Manager has key responsibilities of managing vendor payments coordinating cash and debt management; preparing real and personal property tax returns; filing and paying sales and use tax, coordinating with third party tax consultants on income tax preparation and issues and maintaining the fixed asset system including managing fixed asset approval and capitalization.  This position may have direct reports.

Essential Job Functions

• Provide on-site leadership for the team by building and motivating team members to meet goals while adhering to their responsibilities.  
• Maintain knowledge of current Generally Accepted Accounting Principles (GAAP) guidance, specifically in relation to accounts payable accounting, fixed asset management, treasury, and taxes and update internal processes and procedures to comply as necessary.
• Implement and maintain accounting procedures to comply with internal control requirements to ensure appropriate internal control processes and procedures are in place and adequate.
• Communicate to and collaborate with executive management on daily cash / debt status to assist with effective investment / debt reduction initiatives. 
• Responsible for managing company stock transactions (repurchases / sales, dividend payments, issued / outstanding reporting).
• Manage the Major Expenditure Request (MER) accounting including designating the appropriate capitalization and tax status of such expenditures. 
• Maintain the company’s fixed asset system including establishing asset lives in accordance with applicable tax law, calculating depreciation in compliance with GAAP, and disposing of assets with proper authorization. 
• Responsible for managing the company-wide credit card program including reconciling the employee and accounts payable credit cards and the maintenance of the employee card hierarchy for approvals.
• Complete a monthly evaluation and cost true-up of Workers Compensation claims while maintaining employee confidentiality.
• Maintain the monthly calculation of bank covenant(s) and provide necessary feedback to executive management in relation to such covenants. 
• Complete a monthly analysis of the legal and tax fee accrual accounts and adjust as necessary.
• Responsible for maintaining the interest expense and income accrual calculations on borrowings and notes receivable (including intercompany notes), respectively. 
• Calculate and complete a monthly income tax provision journal entry.
• Manage monthly / quarterly / annual sales, use and commercial activity tax filings for various states including reconciling system generated tax liabilities. 
• Responsible for updating and filing company-wide personal property assessments and personal property tax returns. 
• Responsible for reviewing annual real estate tax liabilities for accuracy and timely filing.   
• Collaborate with third-party tax firm to manage the annual income tax return process including the preparation of files for depreciation adjustments to the tax liability.
• Manage and complete employee benefit plan audits and 5500 filings for such plans. 
• Collaborate with the Accounts Receivable department to validate and file unclaimed property returns.
• Responsible for various government reporting requirements as necessary.
• Responsible for timely renewal of vehicle licenses as well as applying for new vehicle titles and payment of appropriate sales taxes.
• Annually prepare and validate 1099 forms to be distributed to applicable vendors.
• Responsible for collaboration with the other finance / accounting managers during the quarterly and annual audit to ensure that deliverables are provided timely.
• Coordinate and manage sales and income tax audits as necessary from time to time. 
• Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position.
• Performs other related duties as required and assigned.

Knowledge, Skills, Abilities (Competencies)

• Excellent communication skills both orally and written.
• Thorough knowledge of US GAAP.
• Ability to work in a fast-paced environment.
• Ability to interpret and analyze accounting standards to facilitate decisions through ambiguity and complexity.
• Ability to execute and follow-through to completion and documentation.
• Ability to analyze and evaluate procedures and work processes and to exercise appropriate

judgment in establishing priorities and work methods.

• Strong work ethic with the ability to work independently or in a team.
• Aptitude for customer service and interpersonal skills.
• Ability to establish and maintain working relationships with individuals at all levels.
• Ability to efficiently utilize Microsoft Office, JD Edwards, Sage FAS, and Data Access Studio.
• Manage and prioritize multiple tasks and projects in parallel in a time sensitive environment.
• Strong attention to detail, analytical, problem solving and organizational skills.

Education and Experience

• Bachelor’s Degree and/or 7+ years of relevant experience required. 
• Certified Public Accountant preferred.

Base Compensation Range: $79,949 - $125,049 annually

Variable Compensation Range: Incentive bonus eligibility up to 12% of gross annual salary base on company performance.

Health and Ancillary Benefit Overview: 

• Medical, Dental & Vision Insurance with low employee premiums
• Free off-site medical clinic
• Company paid Life Insurance & Short-Term Disability
• 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more
• Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades
• Paid Time Off and Sick, Family & Parental Paid Time Off
• Ten (10) Paid Holidays
• Four-day work weeks, varied shifts, and flexible remote work options depending on position  
• Career progression program for advancement
• Free in-house welding, grinding & machine operation school  
• In-house training program

WORK ENVIRONMENT:

Professional office environment with some time spent in the manufacturing area.  Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures. Machinery with energy sources including electrical, mechanical, hydraulic, pneumatic, chemical, or other energy.

Applicants for Paul Mueller Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.

Paul Mueller Company is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with disabilities.

EEO Employer/Disabled/Protected Veteran

If you are interested in applying and need assistance or have questions, please call 417-575-9000.